TSW010 – Din Rail Switch | Quick Start Guide

TSW010

The TSW010 offers the most affordable way to extend network connectivity to multiple Ethernet devices. Featuring give 10/100 Ethernet ports ensure stable and reliable connectivity, sufficient for most industrial applications where high throughput is not required.

The TSW010 has a wide range of supported power supply voltages (9-30 V) and a rugged design that makes it suitable for professional solutions. It is compact in size and has ab integrated DIN rail bracket enable easy installation across different industrial environments.

Features

ETHERNET
LAN	5 x RJ45 ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)	1 Gbps
MAC address table size	2K entries
Jumbo frame support	2048 bytes
POWER
Connector	2-pin industrial DC power socket
Input voltage range	9 – 30 VDC
PoE (passive)	Passive PoE. Possibility to power up through first LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power consumption (idle/max)	Idle: 0.3 W / Max: 0.9 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet	5 x RJ45 ports, 10/100 Mbps
Status LEDs	1 x Power LED, 10 x LAN status LEDs
Power	1 x 2-pin industrial DC power socket
PHYSICAL SPECIFICATION
Casing material	Anodized aluminum housing and panels
Dimensions (W x H x D)	113.1 x 27.4 x 80.5 mm
Weight	146.5 g
Mounting options	DIN rail or wall mounting (additional kit needed), flat surface placement
CERTIFICATION & APPROVALS
Regulatory	CE, REACH, RoHS, WEEE
	UKCA, FCC, IC, CB, RCM
OPERATING ENVIRONMENT
Operating temperature	-40 °C to 75 °C
Operating humidity	10 % to 90 % non-condensing
Ingress Protection Rating	IP30
SAFETY
Standards	EN IEC 62368-1:2020+A11:2020

source https://www.gethitch.com/tsw010-din-rail-switch-quick-start-guide/